Bang and Die Casting First Quarter 2020 Lean Six Sigma Awards Conference-青岛邦和精工集团有限公司

Home
About Us
Products and Services
Human Resources
News
Contact Us

Home page

Bang and Die Casting First Quarter 2020 Lean Six Sigma Awards Conference

Release time:

2020-04-20 16:58

▲ Director of Management Li Zong presided over the award ceremony

On the morning of April 20, 2020, Qingdao Banghe Die Casting Co., Ltd.'s first quarter 2020 Lean Six Sigma Awards Conference was held in the playground in front of the office building. The conference was presided over by Li Xiaoqiu, managing director, and general manager Shen Changlong and production director Tan Hui attended the awards conference.

First of all, on behalf of the company, Mr. Li summarized the improvement of lean in the first quarter of 2020, and read out the list of winners, fully affirmed the support of the majority of employees for lean work, and expressed heartfelt congratulations and sincere thanks to the award-winning employees.

In the first quarter of 2020, the Company received a total of 34 proposals submitted by various departments.At the same time, in line with the principles of fairness, impartiality and openness, after layer by layer evaluation, the best is selectedOne first-class award; 6 second-class awards; 10 third-class awards; There are 17 encouragement awards, and this time a total of 2270 yuan will be awarded. Among the third prize, 3 were selected for spraying workshop, 3 for die casting workshop, 3 for processing workshop and 1 for quality control department. The winning amount ranges from 50 to 100 yuan, which will be presented by production director tan zong. In the second prize, the die casting (post-processing) workshop was selected for 3 pieces: Zhai Chunwang and Lu Yong's proposal "1085.001.0890 Shot Blasting Process Improvement", "11381901 Die Casting Gating Removal Tooling Improvement" and Li Ning's proposal "Improvement of Low Pressure Lift Tube Sealing Lakingly"; Two pieces of processing workshop were selected: Yin Weichen, Qiao Changhua and Wang Wanli's proposals "Improvement of Heiwo Shi Handrail Tooling" Improvement of 9726412 ". One spraying workshop was selected: Zhao Guanghua's proposal" Improvement of 951 Spraying Process ". Each piece will be awarded to 200 yuan, which will be presented by Shen Zong. The first-class award was won by Li Ning's proposal "Improvement of 214800013 Sand Core Crack" in the die casting (casting) workshop, and 300 yuan was awarded by Shen Zong.

▲ Production Director Tan Zong presented the "Level 3 Award" and took a photo with the winning team.

▲ General Manager Shen Zong presented the "Secondary Award" and took a photo with the winning team.

▲ General Manager Shen Zong presented the "First Class Award" and took a photo with the winners.

Director Li of the die casting workshop of the "first-class award" winner delivered his acceptance speech.

The improvement and commendation of the full cost proposal is of great significance. Through the proposal to improve the work, the company has effectively reduced costs, improved efficiency, improved quality, ensured safety, and improved the on-site operating environment. On the other hand, through the proposal improvement conference, the advanced technology and management methods were comprehensively promoted, the internal communication and interaction mechanism was established, and the atmosphere of learning and mutual assistance was formed. Through the evaluation and reward, effectively stimulate the entrepreneurial enthusiasm of all employees, encourage employees to consciously improve production skills, improve production efficiency. At the same time, the company standardizes the improvement results, promotes and applies them in production and work, so that advanced technologies and methods can be quickly applied in practice, forming mature technological achievements and enhancing the company's competitiveness. I hope that colleagues will take this award ceremony as an opportunity, Do not forget your initiative mind, make persistent efforts and actively write a new chapter in the lean improvement proposal work of Qingdao Banghe Die Casting Co., Ltd. in 2020.

"Jin Mouse Leaps over the State on Clouds and Sails Brilliant 2020" Annual Meeting

Bong and 8D Training Documentary

On December 30, 2024, at 18:18, the 2025 Annual Gala and 2024 Award Ceremony of Qingdao Banghe Machinery Co., Ltd. was grandly held at the Qingdao Jiaozhou Marriott Hotel. All employees of the company gathered together to review the struggles of the past year and look forward to the development prospects of the new year.

The annual conference themed "Lean Management, Moving Forward" was successfully held.

The auspicious dragon leaps over the sea to bid farewell to the old year, while the golden snake brings blessings to embark on a new journey. On December 29, 2024, at around 12 PM, the annual meeting themed "Lean Management, Moving Forward" was successfully held at the Marriott Hotel in Jiaozhou, Qingdao, by Qingdao Banghe Die Casting Co., Ltd. Over 300 employees from Banghe Die Casting Company, along with General Manager Shen Changlong, Group Quality Director and Management Director Li Xiaoqiu, and Production Director Tan Hui, participated in this themed annual meeting.

"Jin Mouse Leaps over the State on Clouds and Sails Brilliant 2020" Annual Meeting

Time flies, time flies. The busy 2019 has passed in a twinkling of an eye. With opportunities and challenges, we have ushered in 2020. On the occasion of bidding farewell to the old and welcoming the new, the 2020 Spring Festival Party of Qingdao Banghe Die Casting Co., Ltd. was successfully held in Jinlongyuan Hotel on December 31, 2019.

Bang and Die Casting First Quarter 2020 Lean Six Sigma Awards Conference

In the first quarter of 2020, due to the impact of the "new crown" epidemic, to our factory to resume work, resume production caused a lot of difficulties, but our state and people to meet the difficulties, actively into the work, put forward and improve more cost-effective, improve the working environment of employees of the project, this commendation meeting aims to enhance the positive initiative of employees.

Bong and 8D Training Documentary

On July 23, 2020, Mr. Li Xiaoqiu, the management representative of the die casting company, trained the company's department heads and logistics personnel on the 8D method.

AIAG-VDA FMEA training documentary

From September 18 to 19, 2020, NQA training instructor, Mr. Yang Bin, conducted a two-day special training on the new version of FMEA for our project team and department leaders. Our company's project engineers, quality engineers, workshop process engineers, system management engineers, company leaders Li Zong, Tan Zong and Dubaosi customers Li Gong, Industry and Trade Manager Zhao, and AIA Yuan Gong participated in this training.

BANGHE PRECISION GLOBAL

Tel: +86-13606302860

E-mail：zhengzhaoyuan@banghe.com

Add: Madian Industrial Park, Jiaolai Sub-district Office, Jiaozhou City, Qingdao City

About Us

Products and Services

News

Customer Message